SPECIFICATIONS

Plug Type: EU

Size: 16*13*6

Measurement Model: 2 lines

Wavelength: 535 nm

Type: Vertical & Horizontal Lasers

INSTRUCTIONS

The laser can be used in 2 modes.

1. Pressing the button on the top of the laser will turn the laser on in angle lock mode, the laser will project in a fixed position allowing for a cross to be generated and then tilted allowing for marks to be made at an angle. While the laser is in angle lock mode, the laser will flash every 5 seconds to remind you that it is in angle lock mode and is not self-levelling

To turn off the laser while in angle lock mode, press and hold the button on the top for 5 seconds.

2. Sliding the side power button to on engages

self-leveling mode, the laser will now level to a straight horizontal and vertical line, if the laser is placed on a surface that has more than a 3° slant, the laser will rapidly flash. To correct it, move the laser to a flat surface, or adjust the surface accordingly.

Slide the side power button back to turn the laser off. 

WARNING - Do not look directly into the laser.